Robudda723
New Member
Posts: 5
Registered:
11/1/09
Status:
Offline
From: UT
|
11/3 9:58a
|
Do not have time to wait for the Kit. Need to get butt of Expy level again. Anyone have a part number of rear springs that will work on the 4x4. When I look up by vehicle, every thing says 4x2. Will these work or no?
Thnks,
Rob
|
|
Thermo 
NOS Lightning Member
Posts: 11,252
Registered:
9/29/01
Status:
Offline
From: VA Truck: 1997 Expedition
|
11/3 4:27p
|
Rob, they will work for the fact of allowing you to drive the truck, but not for leveling out the truck. They will be about 3" too short for what you are after. You should be able to run to a local wrecking yard and find an expedition or 2 sitting there on the lot. Then all you need is a 4x4 vehicle to pull the springs from. The other option is to give Titus Will Ford in Tacoma, WA a call (aka, Fordpartsonline.com) and they will send you the factory springs for your truck no questions asked at about the best price you can find for factory springs.
Wish you luck.
Chris "Thermo" Coleman, Nukie the radioactive 97 Ford X, and K`Re Ann the 03 Jag X
|
|
Robudda723
New Member
Posts: 5
Registered:
11/1/09
Status:
Offline
From: UT
|
11/4 10:29a
|
Thanks Thermo, have that paged saved. Found a local wrecking yard that had them. Paid a bit more then if I pulled myself but they are the only ones that had the springs, and they have to pull. $30 apiece. So far after getting the expy I only have $70 into it and it is now road worthy.
Rob
|
|
BoeSki 
SuperCrewZer Member
Posts: 3,795
Registered:
11/12/02
Status:
Offline
From: NC Truck: 1998 Expedition Mods: 32
|
11/8 3:58a
|
Shoot, I wish I caught you before you purchased them, I would of gave you the ones I had up in the attic for the cost of shipping. Oh well, atleast you are on the road now.
boe
|
|